Simple Steps.
Beautiful Results.
Our panels are made to be easy—whether you're a seasoned pro or figuring it out as you go. Here's what to know before you start:
​
-
Let panels acclimate for 24 hours
-
Gather tools, safety gear, and adhesive
-
Follow all local building codes
-
Take your time—it shows in the finish
​
​
​​​​​​​A Few Tips That Matter:
​
-
Dry fit before you glue
-
Sand when needed for a seamless edge
-
Hide screws in grout lines
-
Wipe extra adhesive before it dries
Prep The Area
Clean the surface and gather your tools.
​
If you’re working outdoors, install flashing or house wrap first. A little care up front makes everything easier.
Plan & Trim
Dry-fit your layout and trim where needed.
​
Adjust panels or wraps for tight corners and clean seams. Better to cut once than patch later.
Apply & Mount
Wipe the backs, apply adhesive in vertical lines, and add extra at seams.
​
Press the panel into place with a slight twist, then screw in through hidden spots. The fit should feel snug, not forced.
Finish the Details
Caulk gaps. Use your touch-up kit to blend paint.
​
Light layers, dry time, and a gentle hand make all the difference. A clean finish always shows.
