Antico Elements Blog

Installing Faux Stone Panels Made Easy

Posted on January 8, 2014

Installing Faux Stone

Faux Stone is easy and fun to work with, but there are a couple of tools and tips that will make the project easier. The first thing to remember is to have all the tools you will need. Below you will find a list of the simple tools that will help you finish your project.

• Measuring tape and pencil
• Hand saw (a table saw, miter saw or jig saw can be used if available.)
• Nails or screws (exterior grade if used outdoor and masonry screws for brick, concrete etc.)
• Nail set
• Hammer (or screw driver/drill if using screws)
• Level
• Framing square
• Chalk line
• Construction adhesive, E.G: Liquid Nails, PL, etc.
• Safety Glasses

After gathering all your tools take your time to temporarily place the panels around the area which you plan to cover. This will give you a good idea of which ones you have to cut. Preparation is essential to ensuring short project time as well as a professional look.

The second tip to remember is to start with the corners first. If you are using our corners temporarily place them in using nails and no adhesive. This will give you a picture of what the room will look like. Make sure that everything is perpendicular to the floor. Remember to avoid using too much adhesive for the corners.

Last but not least is the third recommendation. Place the panels from left to right. This is the correct way to place them. It isn’t necessary to cut the panels before you place them. You will cut them as you go along which guarantees you make the right cut to the right panels. If you cut the panels before actually putting them in place then the order of the panels can be messed up and you won’t get a professional look. As you see below they are quite light and easy to place.

Installing Panels

Installing Panels

In this section you can see what happens when it is not applied properly which is why it is so important to remember to use the correct installation procedures which can give you the best outcome. This project is easy to set up when you plan out where the ends of each panel will go. This could have been avoided if the same panels had been used.

Bad stone panels application

Bad stone panels application

Enjoy your newly remodeled house. Take pride in the fact that you did it all on your own and that you saved money on a hard project that imitation stone panels made easy. Using polyurethane product also ensures a great finish for the project.

The installation may seem tricky at first, but anybody can do it. The truth is that it is easier to use then most televisions. The only way people make mistakes is because they don't read or follow instructions properly.

Any stone or brick project is made possible with polyurethane panels. In fact it is better to use because it avoids all the drawbacks that are associated with natural stone.

Do You Want To Cover Concrete Foundations With Faux Brick Or Stone? No Problem.

Posted on August 15, 2013

The use of formed concrete foundations or prefab and insulated walls are simply the standard in today’s construction world. After all, have you seen anyone build a foundation with stone or cinder blocks lately? We didn’t think so. Nobody today is willing to spend the money necessary to build the foundation with a material that provides a better finished look, right away.

Before Stone Cladding

Before Stone Cladding

Most of the homes you see today have an exposed concrete foundation that either looks like rough concrete or that has a brick pattern which undoubtedly looks fake.

What can you do in this situation?

Painting those walls is just going to make a very small cosmetic improvement. Many who are not aware of other solutions ahve also used vinyl siding, with the results we all see around us. What you really are left with is covering the concrete foundation with realistic faux stone, rocks or brick. You have already spent a considerable amount of money to build the house and the foundation so, most likely, you will want to find an affordable faux stone cladding solution.

Available stone cladding options.

1- Paint. As mentioned this provides a visually small improvement but it’s definitely affordable.

2- You could look into applying a layer of textured stucco. This wouldn’t clearly work where the foundation has a brick pattern. The stucco will follow those fake grout lines and show what is behind it. It is also not that affordable as the foundation has to be prepared and the stucco must be applied with a trowel, which is labor-intensive.

After Stone Cladding

After Stone Cladding

3- Some companies who normally install this type of cladding are used to cast stone, which is made of heavy concrete mixes. They say it is a lighter alternative to real stone or brick but it is still quite heavy nonetheless. Stucco cannot be applied directly to the concrete as well, particularly if it has been already painted. In most cases you will need to install a layer of plywood or flat boards on which to glue block by block.

4- Use a light weight faux stone that solves a wide range of hurdles. When using faux rock and stone panels you will bypass the biggest obstacle of the project; the preparation of the concrete wall.
This material will also remove the constant need to fix peeling and dark moldy spots.
Faux stone panels are usually less than two inches thick so they integrate well with siding materials above the foundation level. The size and look of the stones are very different so you are not stuck with just one pattern and color.
As you know, concrete is one of the worst insulating materials and it transmits the outside temperatures to the inside of the wall. This is mostly the reason why basements are so cold. Using a layer of faux stone, the one made of resins that provide an R4 or R5 insulation factor, will protect you for extreme temperatures.
Paint, stucco or cast stone will not do that therefore the saving in using faux rocks also shows up in your heating and cooling bills.

Stone below siding

Stone below siding

Another great article on how to use faux stone as siding is here:
http://www.anticoelements.com/blog/just-in-stacked-stone-panels-to-reface-a-home-facade/

Let's not forget one of the most important advantages and that is the savings in labor costs.

For an example of how easy it is to install these panels make sure to visit our Installation Pages.
http://www.anticoelements.com/blog/installation-pages/

One thing these faux stone panels are great for is the skirting of a mobile home or raised home. If you have an open space below the foundation of your home there is a very simple solution. House skirting with panels of stone. All you have to do is create a simple frame with vertical strips and glue/screw the faux stone on them. It will look like a real and solid stone wall.